Fall prevention movable hardware for wall use, square type, IRS-7575-150.
Disaster preparedness goods
Factory and office tipping prevention Measures against falling and scattering during movement
- Company：ミドリ安全
- Price：Less than 10,000 yen
Reinforcement bracket Product List and Ranking from 38 Manufacturers, Suppliers and Companies | IPROS
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Reinforcement bracket Manufacturer, Suppliers and Company Rankings
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
- null/null
- 大林 本社 Gifu//Building materials, supplies and fixtures manufacturers
- 桐井製作所 Tokyo//Building materials, supplies and fixtures manufacturers
- 4 環境資材 Kochi//Building materials, supplies and fixtures manufacturers
- 5 ルッドスパンセットジャパン Osaka//Interior Design
Reinforcement bracket Product ranking
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
- Foam machine type spray polyurethane insulation work
- Reinforcement Fittings "Soel Series" 桐井製作所
- Seismic reinforcement hardware 'FIT Power' for concrete block walls, etc. 大林 本社
- 4 Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12 大林 本社
- 5 Reinforcement hardware for wooden houses [Strong wind and earthquake measures] 環境資材
Reinforcement bracket Product List
1～30 item / All 105 items
Displayed results
Duct Mounting Fitting "Connection Fitting S"
The surface finish is 3C (trivalent chrome)! There are tapped holes for component installation, so nut fastening is unnecessary.
The "Connection Kanag S" is a convenient product for supporting ducts, wiring, and small parts. All Kanags have tapped holes for attaching parts (except for S-5), so there is no need for nuts. S-11 and S-11B are used when connecting U-1 and U-26 at a right angle (S-11B has a 9φ hole instead of a tapped hole). Additionally, S-20-25 and S-20-32 are sturdy right-angle connection Kanags, so please use them for securing heavy objects. 【Lineup (partial)】 ■S-4-3C ■S-4-5-3C ■S-5-3C ■S-6-3C ■S-6B-3C *For more details, please refer to the PDF document or feel free to contact us.
- Company：カメダデンキ
- Price：Other
Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12
Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. The maximum protrusion of the angle support on the site side is kept to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it enables a reduction in construction time. The FIT Power Type 12 is compatible with block walls of H1,200mm from the road surface. *We have models available for block walls ranging from H1,200 to H1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.
- Company：大林 本社
- Price：Other
Seismic reinforcement hardware "FIT Power" Type 16 for concrete block walls, etc.
Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It limits the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it enables a reduction in construction time. The FIT Power Type 16 is compatible with block walls of H1, 600mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.
- Company：大林 本社
- Price：Other
Seismic reinforcement hardware "FIT Power" Type 18 for concrete block walls, etc.
Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve earthquake resistance in a short period with minimal construction.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by one worker from the site side, enabling a reduction in construction time. The FIT Power Type 18 is compatible with block walls of H1, 800mm from the road surface. *We have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT GATE Construction Case: FIT GATE
The dimensions are W14m × D6.1m × H3.5m! Installation case with body mounting, completed in 2 days with 3 workers.
We would like to introduce a case where we delivered the "FIT GATE." The dimensions are W14m × D6.1m × H3.5m, with the structure installed, taking 2 days with 3 workers. It features partition walls made of reinforced glass FIT, a garage roof, and corrugated GL steel sheet roofing. There is an existing foundation on the north side. On the back side, there are middle windows and a side entrance sliding door. Please feel free to consult us when you need assistance. 【Case Overview】 ■Dimensions: W14m × D6.1m × H3.5m ■Required Days: 2 days with 3 workers *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT GATE Construction Example: Arch Gate 2
A case where an arch gate installed at a private residence was manufactured and delivered by "FIT WALL"!
We would like to introduce a case where we manufactured and delivered an "Arch Gate." The size is approximately W8,800 × H2,675 mm, and the installation time was about 4 hours. The design takes advantage of the irregularities, and downlights provided by the client were installed on the ceiling within the factory. After the structure was installed, the wall finishing was carried out by the contractor, and it was completed. 【Case Overview】 ■ Product: FIT WALL ■ Size: Approximately W8,800 × H2,675 mm ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT GATE construction example: General door + shutter gate (slab roof)
The universal door has a slab roof! It features a shutter exposure type structure with the shutter case visible from the back.
We would like to introduce a case where a gate that integrates a general access gate and a shutter gate was manufactured and delivered by FIT GATE. The roof of the access gate features a slab roof with some cut-out processing, and the structure is of the shutter exposure type, allowing the shutter case to be visible from the back. After the structure was installed, finishing work such as wall tiling and fixture installation was carried out by the construction company, and it was completed. 【Case Overview】 ■ Dimensions: Approximately W11,400 × H2,925 mm (total length) ■ Installation Time: Approximately 7 hours *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT Power Construction Case: Public Facility <Mannen Wall>
Since the projection is smaller than the retaining wall, it can be installed while maintaining space without affecting the equipment!
We would like to introduce a case where a FIT Power permanent wall type was installed during the renovation of a permanent wall at a public facility in Aichi Prefecture. The lateral reinforcement was arranged by the construction company and was installed along with the FIT Power. By installing the FIT Power on the existing wall and retrofitting it for seismic resistance, we can complete the work in a shorter period with less extensive work compared to demolition and replacement. 【Case Overview】 ■ Location: Inside a public facility in Aichi Prefecture ■ Since the projection is smaller than that of a retaining wall, it can be installed while maintaining the usual space without affecting the equipment. *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT Power Construction Case: High School
A case where the conventional site space has been maintained even after installation!
This is an example of the seismic reinforcement of a block wall located within the grounds of a certain high school in Saitama Prefecture, where FIT Power (standard specification model 18) was adopted. Although a retaining wall was installed on the block wall, FIT Power was added as additional reinforcement. FIT Power has a smaller projection than the existing retaining wall, allowing the original site space to be maintained even after installation. 【Case Overview】 ■ Location: Within the grounds of a certain high school in Saitama Prefecture ■ There is a road and a neighboring plate installed on the adjacent side, but there is no projection that narrows the site, and it does not stand out too much. *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT Power Construction Case: Private Residence
It is inconspicuous in appearance and neat! The image of the gate so far remains the same.
We would like to introduce a case where FIT Power was implemented at a private residence. With the new carport installation, the gate pillar on the right side of the front became a standalone column. Given that this could lead to collapse damage in the event of an earthquake, we applied seismic reinforcement using FIT Power. The reinforcement is unobtrusive and maintains a clean appearance, preserving the original image of the gate. 【Case Overview】 ■ FIT Power typically accommodates block thicknesses up to 150mm, but in this case, we used a thickness of 250mm. *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT Power Construction Case: Substation
Introducing a case where FIT Power was adopted for seismic reinforcement of the boundary wall of a substation!
We would like to introduce a case study of FIT Power installation at a substation. Installed on both the road side and the property side. FIT Power was adopted for the seismic reinforcement of the boundary wall. Feel free to consult us about anything related to exteriors, including seismic exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual inquiries. 【Installation Locations】 ■ Road Side ■ Property Side *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT Power Construction Case Study: Apartment Building
We would like to introduce a case where the FIT Power 20 model (made to order) was installed for seismic reinforcement of boundary walls!
Here is an introduction to a case study of FIT power installation in a condominium. On the property side, there is a bicycle parking area, but it does not become cramped, allowing for parking as usual. On the neighboring side, a road and a neighboring plate have been installed. The plate is thin, so it does not obstruct passage, and the construction can be completed in a short period, allowing for seismic reinforcement work that takes into consideration the lives of the condominium residents and nearby neighbors. 【Case Overview】 ■ Bicycle parking can be done as usual without feeling cramped. ■ Seismic reinforcement work can be carried out with consideration for the lives of the condominium residents and nearby neighbors. *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT Power Construction Case: Eternal Fence
Supports long-lasting walls! Since it is a made-to-order product, the manufacturing lead time is approximately up to 1 month.
We would like to introduce a case study of FIT power installation with a ten-thousand-year wall. One set is installed between the columns. As this is a made-to-order product, the manufacturing lead time may take up to approximately one month. For details regarding lead times and other inquiries, please contact us. 【Features】 ■ One set installed between the columns ■ Manufacturing lead time is up to approximately one month *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
FIT Power Construction Case: Seismic Reinforcement of a Permanent Wall
There are almost no protrusions! Here is an example installed on a permanent wall in a certain location in Tokyo.
We would like to introduce a case study of FIT Power installation for seismic reinforcement of the Mannen Wall. One set of FIT Power is installed between each pair of columns to implement seismic reinforcement. On the parking lot side, only the plates are visible, and there are hardly any protrusions, allowing the parking space to remain the same size as before. On the site side, angle supports have been installed. 【Case Overview】 ■ One set installed between each pair of columns ■ Parking space can be used at the same size as before *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
Sukiya-style gate construction example: Shrine building
We had the honor of manufacturing the shrine building for Akiba Shrine located in Gifu Prefecture!
We would like to introduce a case study of construction at a shrine. We manufactured the main hall of Akiba Shrine, which is adjacent to the famous Nemeido Shrine, commonly known for "Monet's Pond," located in Itadori, Seki City, Gifu Prefecture. Construction images are also available in the related links. Feel free to consult us about any inquiries related to exterior construction, including seismic exteriors, seismic reinforcement, and the traditional Japanese gate "Sukiya-mon," as well as installation work, delivery times, and individual consultations. 【Case Overview】 ■Location: Gifu Prefecture ■Construction Site: Main Hall of Akiba Shrine *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
Examples of Sukiya-style Gate Construction: Sukiya Architecture and Shoin Architecture
A symbol of Japanese culture! A dignified wall complements a genuine Shoin-style house.
We would like to introduce examples of Sukiya-style and Shoin-style construction. We combined an elegant fence with a genuine Shoin-style residence. Sukiya-style and Shoin-style are symbols of Japanese culture. Feel free to consult us about anything related to exteriors, including seismic-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual consultations. [Case Overview] ■ Combined an elegant fence with a genuine Shoin-style residence ■ Symbol of Japanese culture *For more details, please refer to the related links or feel free to contact us.
- Company：大林 本社
- Price：Other
Reinforcement Fitting "L-shaped Angle"
Both sides can be mounted with a double-sided plate! A variety of sizes in a 32 width lineup.
This product is an iron "L-shaped angle." We have a variety of sizes available in a 32 width. It has a double-sided plate hole, allowing for installation from either side. In addition, we also offer a wide range of sizes for the 16 width L-shaped angle. 【Features】 ■ Made of iron (unichrome plated finish) ■ 32 width ■ Double-sided plate hole *For more details, please refer to the PDF document or feel free to contact us.
- Company：サヌキ 本社・工場
- Price：Other
Reinforcement Hardware Product Catalog
Featuring a lineup of L-shaped angles in various sizes and stylish counter brackets!
This catalog introduces the "reinforcement hardware" handled by Sanuki. It features a wide range of products, including the "RE Counter Bracket," which has a safe load capacity of 100 kg, as well as the "L-type Angle Wide" and "L-type Bracket," which have enhanced design with rounded edges. Please feel free to download and take a look. [Featured Products] ■RE Counter Bracket ■Counter Bracket ■Counter Angle ■L-type Angle (32 width) *For more details, please refer to the PDF document or feel free to contact us.
- Company：サヌキ 本社・工場
- Price：Other
Reinforcement Fitting "RE Counter Bracket/Counter Bracket"
It matches well with the wood grain walls! The black color tightens the image of the installation space.
This product is a reinforcement bracket with a smart design that minimizes protrusions. A black (matte) color has been added to the conventional counter bracket series. It matches well with wood-patterned walls, and the black color sharpens the image of the installation space. Mounting screws (with black-painted heads) are included. It can be used for kitchens, wash counters, display shelves, and more. 【Features】 ■ Matches well with wood-patterned walls ■ The black color sharpens the image of the installation space ■ Mounting screws (with black-painted heads) included ■ Made of iron, powder-coated finish, available in white (glossy) or black *For more details, please refer to the PDF document or feel free to contact us.
- Company：サヌキ 本社・工場
- Price：Other
Evolving Weldless GT Method
Achieving high precision and high strength! Construction that does not require special techniques has become possible.
Our company offers the "GT Method," which has expanded the variety of non-welded fittings to meet various needs. The non-welded fitting "GT Hook" maintains precise shapes and can accommodate sizes from D10 to D51 by combining anti-loosening nuts and custom wire materials, tailored to the job site. Additionally, the "GT Hoop" is a high-strength, ring-shaped warp bar that excels in workability, and can be produced in larger diameters from D13 to D32 using an upset butt welding machine. 【Features】 - Compatible not only with FB but also with angles and C-shaped steel. - Quick and easy installation by using a single-sided hook and single-sided U-bolt fixation. - Reliability confirmed through strength testing conducted by specialized institutions. - Stable quality of band rebar can be achieved through upset butt welding. - On-site construction is possible, further enhancing workability. *For more details, please refer to the PDF document or feel free to contact us.
- Company：恵信工業
- Price：Other
![Single pipe joint [Massgood - adjustable type]](https://image.www.ipros.com/public/product/image/58c/2000251794/IPROS815731939825752670.PNG?w=280&h=280)
Single pipe joint [Massgood - adjustable type]
While cutting down on labor hours and material costs, straighten the piles and assemble the vertical scaffolding!
The "Massgood Adjustable Type" is a single pipe joint that vertically erects single pipes, such as the diagonally driven single pipe pile [Scat 91] and extension single pipes. High-tension bolts are used, and the single pipe does not deform even when the bolts are tightened. ~Features of the Single Pipe Joint [Massgood Adjustable Type]~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ Even unskilled workers can vertically erect single pipes by themselves. ■ Effective in narrow spaces where there is no room to drive a disposal pile. *For more details, please download the PDF or feel free to contact us.
- Company：新光工業
- Price：Less than 10,000 yen
Fall prevention brackets 'Tough Bracket' for fixing walls, floors, and storage.
We offer a diverse lineup! We can also manufacture original fittings tailored to your installation location.
Our fall prevention brackets come in a variety of options tailored to different applications, such as "wall-mounted" and "floor-mounted." We can also manufacture original brackets in shapes that fit the installation location. Additionally, we offer "office brackets," which are convenient for situations where drilling holes is not possible, such as in rental offices or storage rooms, or when frequent moving is required during major cleaning. 【Product Lineup (Excerpt)】 ■ Wall-mounted: Fixes the storage unit to the wall at the top ■ Floor-mounted: Fixes the storage unit to the floor ■ Floor-mounted connection: Floor fixation for the connection between storage units ■ Floor and island fixation: When there is no wall for the storage unit ■ Floor adhesive fixation: Strong adhesive for floor fixation, also for connection fixation *For more details, please refer to the PDF document or feel free to contact us.
- Company：ティーエフサービス
- Price：Other
TITAN" | Option "Hardware for Network Connection
It is a fitting that connects nets.
◼️JH52 type ◼️JHS type ◼️JHB type ◼️JHN type
- Company：サンコー
- Price：Other
Wooden House Reinforcement Fittings "L-Type Metal CZ"
Introduction of reinforcement brackets used for the application of wooden house reinforcement systems!
Kankyo Shizai Co., Ltd. sells equipment, materials, and chemicals for creating a comfortable environment. The "L-shaped Metal CZ" is a fitting used for reinforcing wooden houses. Its dimensions are 250×250×50mm, t=6. 【Specifications】 ■ Dimensions: 250×250×50mm, t=6 ■ Packaging: 8 sets/case ■ Weight: 19.2kg/case *For more details, please refer to the PDF document or feel free to contact us.
- Company：環境資材
- Price：Other
Wooden House Reinforcement Fittings "Foundation Metal BZ"
Introduction of reinforcement brackets used for the application of wooden house reinforcement systems!
Kankyo Shizai Co., Ltd. sells equipment, materials, and chemicals for creating comfortable environments. "The Base Metal BZ" is a fitting used for reinforcing wooden houses. The dimensions are 300×260×65mm, t=6. 【Specifications】 ■ Dimensions: 300×260×65mm, t=6 ■ Packaging: 6 sets per case ■ Weight: 18.9kg per case *For more details, please refer to the PDF document or feel free to contact us.
- Company：環境資材
- Price：Other
![Reinforcement hardware for wooden houses [Strong wind and earthquake measures]](https://image.www.ipros.com/public/product/image/78c/2000406257/IPROS17642064797509590788.jpg?w=280&h=280)
Reinforcement hardware for wooden houses [Strong wind and earthquake measures]
It is a fitting for existing buildings. It is also suitable for areas without firebracing foundations or anchor bolts. It can be used for reinforcement with nails or mortise and tenon joints.
The "Build Arm Series" that we handle can be installed on existing buildings and is a reinforcement hardware for wooden houses that allows for wind and earthquake countermeasures at a low cost. Some products in our lineup feature a surface treatment with zinc plating that is resistant to moisture and rust. Currently, we are distributing materials that include data on compression and tensile tests for each product. You can view them immediately via "PDF Download." 【Features of Listed Products】 ■ L-shaped Metal AZ/CZ/II EZ - Contributes to preventing the columns from falling out due to twisting phenomena in the floor. ■ Foundation Metal BZ - Prevents the foundation from lifting or shifting due to earthquakes, etc. ■ Tsuba Metal TP/Foundation Metal DP - Prevents damage to joints caused by vertical and horizontal shaking due to strong winds and earthquakes. ■ Ease Guard NS-21 - Integrates the foundation, base, and columns from the exterior of the building to prevent joint disengagement.
- Company：環境資材
- Price：Other
Search Keywords Related to Reinforcement bracket
- Reinforcement bracket × "Underfloor"
- Reinforcement bracket × "corner"
- Reinforcement bracket × "screw"
- Reinforcement bracket × "Screw"
- Reinforcement bracket × "Earthquake resistance"
- Reinforcement bracket × "wooden"
- Reinforcement bracket × "plate"
- Reinforcement bracket × "Pillar"
- Reinforcement bracket × "Bracing"
Related Categories of Reinforcement bracket
- Fixing bracket
- Support bracket
- Mounting bracket
- Wall Mounting Bracket
- Fastening bracket
- Fall prevention bracket
- Hanging hardware
- Earthquake-resistant brackets
- Solar panel mounting brackets
- Antenna mounting bracket
- Floor brackets
- Vibration prevention bracket
- Snow guard brackets
- Connecting fittings
- Fastening bracket
- Connection fittings
- Receptacle
- Adjustment bracket
- Fittings
- Joint fittings
